A brief discussion on the career development trends of pipe cutting machines

1. Inspect the surrounding area of the task site and remove all debris that may hinder the task and traffic. The ground surface must be free of oil stains to prevent slipping. Workpieces should be stacked equally and sturdily to prevent collapse and injury.

2. Check whether the protective devices on the pipe bending machine are damaged. If they are not properly installed, the machine is not allowed to be operated. The medium-frequency pipe bending machine should have excellent grounding and electrical isolation, and the voltage should be stable.

3. Check the smooth parts of the pipe bender, and add sufficient oil if it is lacking or completely devoid of oil.

4. During the test run of the empty vehicle, check whether the machine operates normally and whether the electrical switches are sensitive and easy to use. After everything is confirmed normal, proceed with the test task.

5. When working together, the two people should closely cooperate and coordinate their actions. A designated person should operate the switch. During operation, they are not allowed to talk or laugh with others to prevent accidental mistakes.

6. The operator must not leave the machine tool when it is in operation.

7. When operating the pipe cutting machine, no one is allowed near the pipe bending area, and protective warning signs should be set up. When prying the pipe, stand firmly to prevent injury from slipping and hitting by the prying rod. Operators can only stand on the outside.

8. When straightening pipes, ensure safety around you. Before using a hammer, immerse it in water for a few minutes to prevent the handle from detaching and hurting people. When hammering on pipes, refrain from wearing gloves.